Inbar 0.63

Pipe with Integral Dripper
Flat Non-Drain PC Dripper

Diameters: Ø 16 | Ø 22 mm

Flow rates:

0.7 | 1.2 | 1.6 | 2.0 | 3.0 l/h

Wall thickness: 

0.63 mm


The answer is Inbar!

  • Medium thickness reusable dripline with flat Non-Drain PC integral dripper.
  • The most demanded solution in hydroponic crops, establishing itself as the answer to the problem of pressure differences and flow in long rows.
  • Optimal for high-end crops and advanced agriculture.
  • Automatic low pressure sealing mechanism (< 0.14 bar).
  • Non-drain: the irrigation lateral remains pressurized during the intervals between irrigation operations, ensuring immediate and uniform irrigation throughout the entire branch.
  • Anti-siphon mechanism to prevent suction of soil particles into the dripper
  • Wide range of pressures to adapt to a variety of topographies.
  • Wide water passages throughout the labyrinth.
  • Long-lasting silicone membrane resistant to agrochemicals.
  • Flexible membrane that allows a uniform flow within a range of pressures.
  • Suitable for difficult field conditions and resistant to agrochemicals.
  • Can be recoiled and applied in the next season.
  • Presented with an internal core to eliminate possible problems of folds inside the coil when working with medium thicknesses.
  • 100% recyclable core with the coil.
  • Complies with ISO 9261.


Technical data

Dripper flow rates

0.70 | 1.20 | 1.60 | 2.00 | 3.00 l/h

Nominal diameter

16 | 22 mm

Wall thickness

0.63 mm

Working range

1.0 - 2.8 Bar (Consult the data sheet).

Some Uses


Red fruits in the greenhouse


Flower industry

Related products